|
2.2.1 Configuring Driver Signing
You can configure how the computer responds to unsigned files on
HARDWARE
tab of
SYSTEM
. Here you
can configure one of three responses:
•
Ignore allows any files to be installed regardless of whether they are digital signature or not.
•
Warn displays a warning message before allowing the installation of an unsigned file. This is the default
option.
•
Block prevents the installation of unsigned files.
Note: When you change the default Driver Signing option, you must select the
Apply setting as system default check box in the Driver Signing Options
dialog box. This will make the new settings the default system setting. If
you do not select the Apply setting as system default check box, the
settings will revert to the old setting when the computer is next rebooted.
|